1998.5-2022 Cummins 103lb Valve Springs (07-S-003)

Fits

Stock  24v springs have 78-82lbs of seat pressure at 1.380″. If you are over 35psi(boost or drive pressure), stock springs do not fully control the valvetrain. Intake and exhaust valves can be blown open by boost and exhaust drive pressure which allows reversion. Reversion can hurt your power potential by allowing exhaust gasses to enter the cylinder on the intake stroke. Inert gasses in the exhaust, when re-introduced into the cylinder shield the fuel particles from oxygen in the cylinder. This does a few things that negatively affect power. It increases the time delay from start of injection to start of combustion, it decreases the maximum pressure and maximum temperature reached in the cylinder and it increases the total time needed to completely burn the available fuel. Correct valve spring pressure is a very important piece of power production. Hamilton Springs solve this problem.

Nose pressure has been lowered from 220lb to 180lb recently. Watch out for other companies that have nose pressures over 250lb.

These springs are great to 4500 rpm. Over that the #110 springs are necessary. Over 4500 rpm with #103 springs you will see broken or cracked retainers due to float and harsh valve actuation.

Part Number: 07-S-003

• Triple Shot Peened & Stress Relieved
• 103lb Springs
• Handles Over 50PSI of Boost
• 180lb Nose Pressure
• Sold as a Set

• The 07-S-003 by Hamilton Cams are replacement Valve Springs for the 5.9L or 6.7L Cummins Engine. Stock springs have 78-82lbs of seat pressure on average at 1.380'.

• This is fine for a stock truck but as soon as you begin to make over 35psi (boost or drive pressure) at 3,800rpm the stock springs begin to lose control of your valvetrain.