2013.5-2022 Cummins Upper Ball Joint (Single) (EMF-7460A)

Fits

Fully greaseable, serviceable, & rebuildable, EMF ball joints are the only ones you will ever have to buy, meaning you'll never have to press the ball joint out of the knuckle ever again!

Part Number: EMF-7460A

Superseded Part Number: EMF-7460S

• Greaseable, serviceable, rebuildable
• Sold Individually
• Comes with an Installation nut
• Removeable race and pin
• 4140 HTSR Material
• Liquid Salt Bath Nitriding is a second heat treating process on the material resulting in up to a 30% strength increase
• Black oxide corrosion resistant coating 

• The Upper Ball Joint Installation Tool is required if your ball joint press kit is not equipped with a die with an ID minimum of 1.93” and a minimum depth of 0.86”.
• The Upper Ball Joint can be pressed into place by a die resting on the cap, however, it risks damaging the cap threads, leading to the possibility of not being able to rebuild or tighten the joint.
• This is your call if you want to purchase the tool or not - EMF is not responsible for damage to the cap that may occur during install without this tool. 
• The Install Tool Kit for the Lower Ball Joint is to avoid damaging the Ring when pressing the ball joints into the knuckle using a suitable Ball Joint Press.

• Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category. The customer is encouraged to contact EMF directly to determine the cause of the fault and to receive warrantied products.

• Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.

• EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty unless it is determined there is a manufacturer defect that caused premature wear. In order to maximize your product life, regular maintenance which includes tightening of the cap and greasing are required.