2011-2016 Powerstroke 4" 4-Link Coilover Lift Kit (BDS590F)

Click here to customize this Kit

Fits

This is one of the greatest lift kits available for your Powerstroke, by converting the front of your truck to a 4-Link suspension setup along with Fox 2.0 Coilovers it means you'll have one of the greatest systems available. This system uses a pair of precision-tuned Fox 2.5 factory series remote reservoir Coilovers for superior dampening capabilities and fade-free performance.

Part Number: BDS590F

• Brake Line Relocation Brackets
• Front Bump Stop Extensions
• Sway Bar Drops
• Forged Drop Pitman Arm
• Track Bar Relocation Bracket
• 5" Rear Block kit
• Tubular control arms built from 2" OD x .250" wall tubing with large greaseable bushings
• HD 1/4" thick steel frame-mounted 4-link brackets
• 4" 4-Link Conversion 
• Fox 2.0 Series Shocks
• Fox 2.5 Series Coilovers
• Clears 35's

Tire & Wheel Combinations:

• 35" x 12.50" w/ 17 x 9 and 4.5"
• 35" x 12.50" w/ 18 x 9 and 4.5"
• 35" x 12.50" w/ 20 x 9 and 4.5"

• Removal of factory block required. Rear add a leaf is required for models equipped with factory 3-7/8" block for the level to tail high stance. Single add-a-leaf kit # 113218 recommended for more level stance - Dual add-a-leaf kit # 113209 recommended for tail high stance. (Add-A-Leafs do not apply to rear leaf spring equipped systems).
• If equipped with a 2-piece driveshaft, a driveshaft alignment kit (#123402) may be required.
• Although extremely rare, front and/or rear driveline vibration may occur.
• If equipped with a rear sway bar, #123009 is required.
• U-bolts will not work on dually.

• Click Here For Installation Instructions
• Difficulty: 3 (where 1 = easiest and 5 = complicated)