2013-2018 Ram 1500 4" Lift Kit (BDS670H)

Click here to customize this Kit

Fits

BDS Suspension 2-4" Suspension Lift Kit for Dodge Ram 1500 4WD 1/2 Ton Pickup. This lift kit is based around two one-pieces, 1/4" laser cut high-clearance crossmembers, and replacement steering knuckles to give you proper ground clearance, clean installation, off-road protection, and maintain proper steering angles. 

Part Number: BDS670H

• Clear up to 35" tires
• BDS 2" coil spacers
• Differential Skid Plate
• Bump Stop Drops
• Anti Sway Bar Links
• 3 point differential drop system
• Strut Relocation Brackets
• Front Stainless Steel Brake Lines
• Track Bar Bracket
• Upper Link Relocation Bracket
• 3" Rear Coil Springs
• Two one-piece, 1/4" laser cut high-clearance crossmembers
• Replacement steering knuckles

Tire & Wheel Combinations:

• 35" x 12.50" w/ 17 x 9 and 4-1/2" 
• 35" x 12.50" w/ 18 or 20 x 9 and 5"

• The rack and pinion steering system are extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. The larger the tire and the less the backspacing, the more sensitive the system becomes, causing minor steering wheel shimmy.
• Not recommended for AWD models.
• Stock 17" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
• Will not fit adjustable air suspension-equipped models.
• This kit is FMVSS No.126 Compliant.
• This kit will bolt on Eco-Diesel models but it will require an aftermarket front driveshaft. 

• Click Here For Installation Instructions
• Difficulty: 4 (where 1 = easiest and 5 = complicated)