2010-2012 Cummins 3.5" Mega Intake System w/ Passenger Side Intercooler Tube (PRC1012MW)

Fits

Most Pusher Products will be a special order and can take up to 1-2 weeks for delivery. If you need it sooner, please contact us for our stock levels!

The Pusher Intake Manifold has been built around a 3.5" inlet that smoothly transitions into two 3" Mandrel-bent tubes. This design also enables the use of a short bolt in place of the long side driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more, yet maintaining the OEM six-bolt pattern. The twin-tube design nearly doubles the outlet size of the OEM manifold while minimizing the impact of the initial section of the number one injector line. Combined, these design features will amount to a 49.4% increase in flow over the factory manifold!

The Pusher Intercooler Tubes are built from 3.5" fully TIG welded, mandrel-bent, .060" thick tubing. These tubes will help optimize your factory intake by replacing the restrictive OEM 2.4" ID plastic driver side tube as well as the 2.63" ID passenger side tube with the free-flowing 3.5" Pusher Intercooler Tubes. For easy installation, you don't even have to try and cut the factory steel bands off the factory tubes in order to save the factory boots. Just loosen the factory clamps and install the supplied parts! The results you can expect to see from this fine craftsmanship is a 50°-200°F drop in EGT's, .5-1 MPG increase, deletion of factory emissions equipment, faster turbo spool, increased throttle response, and less overall strain on your motor!

Part Number: PRC1012MW

• Enables the use of a short bolt to free up even more airflow
• Maintains the OEM 6-bolt pattern
• Nearly doubles the outlet size of the OEM manifold
• Minimizes the impact of the initial section of the number 1 injector line
• Increases flow by 49.4%
• Built from fully TIG welded mandrel-bent tubing
• Replaces restrictive OEM tubing with free-flowing 3.5" Pusher Tubing
• Lowers EGT's 50°-200°F 
• .5-1MPG Increases
• Deletes factory emissions equipment
• Faster turbo spool
• Increased throttle response
• Decreases overall strain on your motor

Includes:

• Pusher 3.5" Mega Intake System
• Pusher Passenger-Side Intercooler Tube
• Heavy-duty 4-ply Silicone Couplers
• Stainless T-Bolt Clamps
• Polished Stainless Dipstick Mount
• Matching Amount of Port Plugs
• OEM Gasket
• All Required Hardware

• You will NEED to delete all of your factory emissions equipment as the manifold does not have provisions to use any of it.
• This product is NOT Emissions Compliant and is intended for Off-road use only
• For an additional charge, select powder coating colours are available on this manifold.