2007.5-2010 Cummins C&C Reman Stage 1 100HP / 20% Over Injector (0986435519SE-R1)

Fits

Injector Build Specs: R1/20% Over/100HP/30LPM

The Industrial Injection 0986435519SE-R1 is a Stage 1 100hp / 20% Over Injector that has been extrude honed and balanced to create a perfect matching set of injectors that flow at 30LPM. The Race 1 100HP / 20% Over injectors can be run with a stock turbo but one of Industrial Injections Phatshaft turbos or their compound turbo setups and is highly recommended to help reduce EGTs.

There has been a lot of time put into making these the best injectors money can buy, which is why they have balanced these to a tighter tolerance than the original manufacturer. From there each and every injector is then tested on a state of the art Factory OEM test stand to ensure that they meet or exceed OEM specifications. This test includes a resistance test, a system leak test, purge, idle speed test, mid load test, full load test, and a static back leak test. Also checked, is the solenoid response time, back leak flow, and fuel delivery. 

Part Number: 0986435519SE-R1

• Extrude Honed And Balanced
• 100HP Gain
• Flow Of 30LPM
• 20% Over Stock
• Built With Brand New Factory OEM Parts with nozzles
• Balanced To A Tighter Tolerance
• Tested On A State of Art Factory OEM Test Stand
• A new copper crush washer and o-rings for your installation. 
• 1-year Unlimited Mileage Warranty

• Sold Individually 
• When replacing the injectors in your 6.7L Common Rail, Industrial Injection highly recommends replacing the injector connecting tubes to avoid new injector contamination.
• The most common failure of new injector installations is from contamination and the problem that they see most on these comes from the injector connecting tubes.
• Each injector has a $150 core charge and is fully refundable if it is shipped back within 45 days.
• All Industrial Injection products are covered by a one year/unlimited mile warranty
• Please call with Engine Serial Number to verify the application!
• All Industrial Injection Performance Products Are Not Legal For "On-Road", "Off-Road", or "Dual-Use". These Products May Only Be used In "Closed Circuit Competition Only" Vehicles.
• Compliance With State And Federal Emission Standards Is The Consumer's Responsibility.