2007.5-2010 Cummins Reman Stage 2 125HP / 41% Over Injector (0986435518SE-R2)

Fits

Injector Build Specs: R2/41% Over/125HP/35LPM

The Industrial Injection 0986435518SE-R2 is a Stage 2 125hp / 41% Over Injector that has been extrude honed and balanced to create a perfect matching set of injectors that flow at 35LPM. The Stage 2 125HP / 41% over injectors should be run with one of Industrial Injections Phatshaft turbos or their compound turbo setups to run more efficiently and help reduce EGTS. Also Recommended is a CP3 Upgrade like their 85% over Dragon Fire Pump. 

There has been a lot of time put into making these the best injectors money can buy, which is why they have balanced these to a tighter tolerance than the original manufacturer. From there each and every injector is then tested on a state of the art Factory OEM test stand to ensure that they meet or exceed OEM specifications. This test includes a resistance test, a system leak test, purge, idle speed test, mid load test, full load test, and a static back leak test. Also checked, is the solenoid response time, back leak flow, and fuel delivery. 

Part Number: 0986435518SE-R2

• Extrude Honed And Balanced
• 125HP Gain
• Flow Of 35LPM
• 41% Over Stock
• Built With Brand New Factory OEM Parts & nozzles
• Balanced To A Tighter Tolerance
• Tested On A State of Art Factory OEM Test Stand
• A new copper crush washer and o-rings for your installation
• 1-year Unlimited Mileage Warranty

• Sold Individually
• When replacing the injectors in your 6.7L Common Rail, Industrial Injection highly recommends replacing the injector connecting tubes to avoid new injector contamination.
• The most common failure of new injector installations is from contamination and the problem that they see most on these comes from the injector connecting tubes.
• Each injector has a $150 core charge and is fully refundable if it is shipped back within 45 days.
• All Industrial Injection products are covered by a one year/unlimited mile warranty
• Please call with Engine Serial Number to verify the application!
• All Industrial Injection Performance Products Are Not Legal For "On-Road", "Off-Road", or "Dual-Use". These Products May Only Be used In "Closed Circuit Competition Only" Vehicles.
• Compliance With State And Federal Emission Standards Is The Consumer's Responsibility.