Universal Quickie Bracket for Single Channel Wireless Controls w/ SD90 Compressor (HP10472-BR)

Fits: Universal

These mounting brackets make your life a little easier; they are the perfect means to control your vehicle's air suspension system. Adjust your air springs simultaneously from inside and outside of the vehicle. No need to get wet, cold or even dirty!

Part Number: HP10472-BR

• The "Quickie Mount" Bracket Assembly comes with everything required for easily mounting an HP10472
• Mounting Bracket
• All mounting hardware
• MAX WORKING PRESSURE / DUTY CYCLE - 1034 kPa [150 psi], 33% @ 689.5 kPa [100 psi]
• MAX WORKING PRESSURE / DUTY CYCLE - 827.4 kPa [120 psi], 9% @ 689.5 kPa [100 psi]
• MAX CONTINUOUS RUN TIME - 5 Minutes ON / 55 Minutes OFF
• RATED FLOW - 29 L/min [1.02 CFM] @ 0 kPa [0 psi]
• INDEPENDENT / SIMULTANEOUS FILL - Simultaneous
• INGRESS PROTECTION - IP55 Compressor, IP67 Electric Connectors
• WEIGHT - 1.09 kg [2.41 lbs]
• AMBIENT OPERATING TEMPERATURE RANGE - -40ºC to +70ºC [-40ºF to +158ºF]
• NOMINAL SUPPLY VOLTAGE - 12 VDC
• MAX CURRENT DRAW - 11 Amps
• 
  

• Military grade solenoids Designed to withstand extreme environments
• Waterproof and debris resistant Demand a Pacbrake IP67 rated controller
• Don't experience the irreparable debris clogs of other leading products! Our compressor has accessible components that allow easy serviceability and replacement of parts
• Smarter App An easy to use app that reads real time pressure feedback within each air spring and provides more of the data you need. The app has 3 built-in memory presets so you can quickly achieve your desired air spring pressure.
• Faster Fills Up to 10% faster than the leading competition
• Quick and Easy Install Pre-installed push-to-connect air fittings and pre-assembled wiring connectors reduce installation time

• This kit is a mounting bracket to be used with an HP10472: Single Channel Wireless Control w/ SD 90 Series Compressor kit and DOES NOT include the compressor assembly or controller.
• *PLEASE NOTE: This kit is to be used with an HP10472: Single Channel Wireless Control w/ SD 90 Series Compressor kit and DOES NOT include the compressor assembly or controller.